Industrial Sofa Table Drawer

**Materials Needed** -------------------- **Lumber & Hardware** * 1/2-inch Plywood: Cut to base dimensions (Two pieces at 12.5" x 11", One piece at 14.5" x 11"). * 1/2-inch Black Iron Floor Flanges: 12 total (4 per drawer). * 1/2-inch x 6-inch Black Iron Pipe Nipples: 12 total (4 per drawer). * 3/8-inch Pan-Head Wood Screws: 48 total (Ensure they are exact length so points do not pierce the bottom of the 1/2-inch plywood). * Black 550 Paracord: 1 spool (for lacing corners). **Wood Staining Supplies** * Sandpaper: 120-grit (for rough edges) and 220-grit (for smoothing). * Wood Stain: E.g., Minwax Dark Walnut or Ebony to match the TV stand. * Foam brushes or staining rags. * Protective Finish: Clear matte polyurethane * Drop cloth and disposable gloves. **Crochet Supplies** * Yarn: Lily Sugar 'n Cream Cotton Yarn (Medium Weight #4) in desired color. 4-7 Skeins, depending on size and quantity of drawers. * Crochet Hook: Size 4.0mm (G-6). Adjust for tight stitches. Gauge is not particularly critical. But given this is a drawer, make sure stitches are tight enough that items stored in the basket/drawer wouldn’t slip through the stitches. * Tapestry Needle: For weaving in ends. **Tools Required** * Power Drill. * 1/16-inch Drill Bit: For pre-drilling pilot holes for screws (Optional- Depends on quality/density of wood being used to prevent cracking or splitting the wood). * Phillips head Driver bit for the drill. * Measuring Tape & Pencil. * Scissors & Lighter: For cutting and sealing the ends of the paracord.